Daily Archives: May 10, 2016

ADOT, Flagstaff team to improve traffic flow on US 180 downtown

Posted on by

FLAGSTAFF — Flagstaff residents and visitors will be able to spend more time enjoying the attractions of northern Arizona and less time getting there thanks to an upcoming Arizona Department of Transportation project designed to reduce congestion in the heart of that city.

ADOT and the city of Flagstaff are teaming to add turn lanes where North Humphreys Street (US 180) meets Historic Route 66, with the city contributing land for right of way. That intersection is where area residents, Grand Canyon visitors and those who play in the snow turn onto and off of US 180.

Using $1.9 million in federal funding, ADOT will add a second right-turn lane from southbound Humphreys Street onto Route 66. The project also will add a single right-turn lane from northbound Humphreys Street onto West Aspen Avenue, the first intersection north of Route 66 and a common route to downtown businesses. That lane eventually will become part of dual northbound lanes through the area.

The project involves land next to Flagstaff City Hall but won’t take any land from Wheeler Park north of Aspen Avenue, according to Audra Merrick, district engineer for ADOT’s Northcentral District, who added that the city’s contribution of land in the right of way made it possible to move ahead quickly.

“When we have partners contributing to these projects ‒ in this case, opportunities for rights of way ‒ it provides the needed value for these projects to be really successful,” Merrick said.

ADOT will do the work because Historic Route 66 and US 180 are state highways.

Design work is set to begin in fiscal year 2017, and construction is expected to start in fiscal year 2019.

Updated Arizona Diamondbacks specialty license plate inspired by new uniforms

Posted on by

118PHOENIX — The Arizona Diamondbacks’ updated look doesn’t end with redesigned uniforms rolled out for this season. The organization has worked with the Arizona Department of Transportation Motor Vehicle Division to overhaul the look of the specialty license plate raising money for team charities.

The plate, with red and black pinstripes across the top and bottom of the plate against a gray background matching the team’s new road uniforms, is now available for purchase at ServiceArizona.com.

Funds raised by the plates go to the Arizona Diamondbacks Foundation for youth education and development, and to provide housing and health care for those in need.

“We are excited to refresh the D-backs license plate to reflect the same look and feel of our new uniforms,” said Arizona Diamondbacks President & CEO Derrick Hall. “We have had such a positive reaction to the new design and look forward to having fans support the team and our Arizona Diamondbacks Foundation on Arizona roadways.”

Also available through ServiceArizona.com is a new Southwest PGA license plate supporting youth golf programs in Arizona that foster sportsmanship, honesty and perseverance, and funding golf scholarships for youth based on community involvement and academic excellence.

“On behalf of the more than 1,300 PGA golf professionals that make up the Southwest PGA and that serve as our daily contact with the golfers throughout Arizona, we are extremely grateful to ADOT and state legislators who helped us create the golf license plate,” said Michael Miller, executive director of the Southwest PGA.

Specialty license plates have an annual fee of $25 for a non-personalized plate and $50 for a personalized plate, with $17 going to support the charities.

There are no special requirements to get the license plates. They are also available with a disability symbol.

Because the Arizona Diamondbacks license plate is a redesign, anyone with the current plate can request the new plate design for a $5 replacement fee. However, the redesigned plate has six characters instead of the seven that are on the current Diamondbacks plate, so some personalized messages won’t transfer. Those holding personalized plates that won’t transfer will have to start the application process from the beginning and pay the full $50 fee.

The original Arizona Diamondbacks license plate design is still valid for use.

For more information on specialty plates, please visit azdot.gov/mvd.

Quagga-affected waters grow: AZGFD identifies Apache, Saguaro, Canyon lakes

Posted on by

AZGFD_Quagga-GA-2PHOENIX — Conclusive evidence of quagga mussels has recently been discovered at Canyon, Saguaro and Apache lakes, major recreational waters on the Tonto National Forest. Effective May 1, the Arizona Game and Fish Department will list these lakes as AIS-affected waters under AIS Directors Orders #2.

There is not an infestation of quaggas at Apache, Saguaro or Canyon. Yet there is genetic and visual evidence in all these waters of the invasive quaggas that colonize rapidly on hard surfaces and can ruin recreational watercraft motors, alter water quality for aquatic wildlife, and clog water intake structures such as pipes and screens, thereby impacting pumping capabilities for power and water treatment plants.

Eight of the 12 major reservoirs in Arizona (Powell, Mead, Mojave, Havasu, Apache, Canyon, Saguaro and Pleasant) are listed as quagga-affected waters.

The other major reservoirs – Roosevelt, Bartlett, Alamo and Horseshoe – are not impacted by quagga mussels, but require AZGFD’s increased protection.

“By law, boaters and anglers must pull their drainage plugs before transporting a watercraft from these listed waters,” said Tom McMahon, AZGFD aquatic invasive species program coordinator, “but it makes sense to simply pull their drainage plugs, and leave them out, anytime they are transporting watercraft in and through Arizona.”

In addition, inspect your boat and ensure it is completely dried before launching into any state waters. This is where the need to “Clean, Drain and Dry” is vital.

Under Arizona law, boaters and all recreationists who take watercraft and other equipment out of waters designated as having aquatic invasive species must use the following steps when leaving that listed water:

1. CLEAN. Clean/remove any clinging material such as plants, animals and mud from the anchor, boat, motor, hull, trailer, etc.
2. DRAIN. Remove all water drainage plugs (and keep them out during transport). Drain the water from the bilge, live-well and any other compartments that could hold water. Drain the water from the engine and engine cooling system(s). You can do this by lowering the outboard, while on the ramp, until the water is removed.
3. DRY. Ensure the watercraft, vehicle, equipment, or conveyance is allowed to dry completely before placing in water in Arizona. Leaving your plugs out during transport will assist in ventilating and speeding the drying time of those difficult-to-dry areas of your boat.

If you are in need of decontaminating your moored boat before transporting from an AIS-affected water, please contact AZGFD at (623) 236-7608.

ADEQ, ADOT and Keep Arizona Beautiful Host Free Environmental Resources Roadshows in Williams and Prescott Valley

Posted on by

PHOENIX — Arizona Department of Environmental Quality (ADEQ), Arizona Department of Transportation (ADOT) and Keep Arizona Beautiful (KAZB) staff will conduct two “Environmental Resources Roadshows,” where attendees will learn about ways to improve their local environment.

The meetings will be held at:

  • Williams
    Tuesday, May 24, 1:30 p.m. to 3:30 p.m.
    Williams Council Chambers
    113 S 1st Street
    Williams, AZ 86046
  • Prescott Valley
    Wednesday, May 25, 11:30 a.m. to 1:30 p.m.
    Chamber of Commerce
    7120 Pav Way, Suite 102
    Prescott Valley, AZ 86314

Don’t Tread on US – the Freedom Rifle by Zanna

Posted on by

800-2-donttredonusFormer Italian and naturalized American, Gianluca Zanna, launches his latest creation: The “Don’t Tread on US – the Freedom rifle”—billed as the most affordable military grade semiautomatic AR15 rifle. The rifle comes in M4 configuration chambered in .223 Wylde that can shoot both 5.56 NATO and .223 4 MOA. The rifle is made in the USA—some from a company in Arizona—and has a lifetime warranty on the lower for just $499.

The affordable rifle is inspired by the sad reality of his former country Italy, where law abiding people have no Second Amendment Right “to keep and bear arms,” but a privilege granted by the government. After studying history, where slaves were never allowed to be armed, Zanna wanted to create the most affordable rifle for the working American man and woman who are committed into the defense of the Republic and innocent life.

Zanna states “The main purpose of the Don’t Tread on US Rifle is to give the opportunity to every law abiding American who loves freedom and refuses to be a subject to be armed with at least one military spec rifle and the knowledge on how to use it. This is my way of social justice!

300--m4“As you know, there are so many great rifles out there on the market, but not every American can afford one, especially now in this economy. After two-years of research and testing I was able to find two American companies (one in Mohave County Arizona) that could provide a great quality product and, thanks to my work, for an incredible price. I dare to say that the Don’t Tread on US Rifle, is the most affordable and reliable military grade rifle on the US market chambered in .223 Wylde.

“Since I am not an FFL dealer (and I do not want to be one) or a gun manufacturer, I want to be sure that is clear, that I will not sell you the whole rifle, but just the upper and then I will direct you to one of my FFL dealers where you will be able to get the lower for the Don’t Tread on US Rifle for an incredible price.”

For that combined with the Zanna-designed upper, you will be paying just $499 (tax and shipping not included).

“When I came out with the idea to create a rifle that every American could afford—and also be able to shoot, considering recoil, rifle’s size and ergonomics—the choice was clear: I needed to focus on the AR15 platform. My original choice for the Don’t Tread on US Rifle was the chamber in 5.56 NATO, so it could shoot both 5.56 and .223. As you know it is not safe to shoot 5.56 in .223 chambers.

“Then by accident, I stumbled into the .223 Wylde chamber. After testing the upper with this chamber I was so impressed that I decided to adopt it for the Don’t Tread on US Rifle. One of the things convinced me the most, was the reliability in being able to shoot and cycle without malfunctions in both calibers the 5.56 and the .223. Even the cheapest steel case rounds like .223 Russian ammunition—that normally would often get stuck in some of the more expensive 5.56 rifles—were cycling smoothly with no problems in the .223 Wylde chamber.

“Also the accuracy was phenomenal. Being able to shoot 4MOA—that translates in groups of 1 square inch group at 25 yards with iron sight and no bench—with this cheap ammo was a great plus. Also, doing more research, I was able to find out that this chamber and rifle twist (1:9) allows you to shoot heavier bullets than the standard 55 or 62 grains, that with quality rounds it can definitely help in overcome the average reach of the .223 or 5.56. These are the reasons why I chose the .223 Wylde Chamber for the Don’t Tread on US Rifle.

When you purchase Don’t Tread on US – The Freedom Rifle, you get more than just a military grade Rifle that can shoot 4 minutes of angle (4MOA). You will receive also knowledge and inspiration with free bonuses that Gianluca believes are as important as the Rifle itself.

  • Free Parchment replica of the US Constitution
  • Free Digital CD Don’t Tread on US by Zanna
  • Free ebook how to become a Rifleman by Zanna
  • Free T-shirt Slaves are never Armed – I am not a slave
  • Free 30 rounds magazine (where permitted by the law)
  • Free laser engraved ejection port “Don’t Tread on US”

“Remember, the rifle is just a tool. Your knowledge and your heart are the weapons,” Zanna stated in a press release.