Utility work on State Route 89 in Prescott scheduled tomorrow morning

CHINO VALLEY — State Route 89, at milepost 309, near Hidden Valley Road in Prescott will be restricted to one lane tomorrow, Oct. 21 between 8 a.m. 9:30 a.m. for utility work. Drivers can expect minimal delays during work hours.

The closures will provide a safe work zone as APS crew’s trim vegetation around power lines.

ADOT advises drivers to allow additional time to reach their destinations and to proceed through the work zone with caution, comply with the reduced speed limit, and be alert for construction equipment and personnel. Law enforcement personnel will be present to enforce the closures as they occur.

The work zone will be clearly marked by temporary barricades and signage.

State Route 89 reduced to one lane at Hell Canyon tomorrow for bridge inspection

State Route 89 north of Prescott at Hell Canyon (mileposts 345) will be narrowed to a single lane from 8:30 a.m. to 2 p.m. on Friday, Oct. 16 as crews perform bridge work.

The lane closure will provide a safe work zone for ADOT crews, who will conduct a routine bridge inspection on the bridge. The speed limit will be reduced to 55 mph and brief delays are expected.

ADOT advises drivers to proceed through the work zones with caution, slow down, and be alert for construction equipment and personnel.

Final striping today on SR 89 at Road 4 North in Chino Valley

CHINO VALLEY — Work at the State Route 89 and Road 4 North roundabout in Chino Valley is almost complete and crews are striping the new intersection today, Sept. 28 from 6 a.m. to 6 p.m.

Minimal impacts are expected during work hours. For the remainder of the week, drivers can expect intermittent lane restrictions approaching the roundabout for final miscellaneous work.

Drivers are encouraged to be alert for construction equipment and personnel through the work zone.

This $2.1 million project began in February and included a new roundabout at the intersection of SR 89 and Road 4 North near milepost 331, the removal and replacement of existing pavement, drainage improvements, new pavement markings and lighting.

Night work scheduled tonight on the Hell Canyon bridge replacement on SR 89

CHINO VALLEY/PAULDEN — Crews will place temporary concrete barrier on the existing bridge at Hell Canyon on State Route 89, approximately 18 miles north of Chino Valley tonight, Sept. 15 as part of the bridge replacement project.

Work hours will be from 7 p.m. to 5 a.m. and drivers will be restricted to one lane and guided through the work zone with flaggers. Delays of up to 10 minutes are possible.

Blasting work for access roads is now complete. Crews are moving into the second phase of the project, which includes constructing the new Hell Canyon Bridge to the east of the existing bridge, switching traffic to the new bridge, and finally dismantling and removing the existing bridge.

This $14.4 million bridge replacement project began in mid-July and is expected to be completed in late 2016.

Paving complete on SR 89 at Road 4 North in Chino Valley

CHINO VALLEY — Paving is complete at the new roundabout on State Route 89 at Road 4 North in Chino Valley. However, drivers can expect intermittent lane restrictions approaching the roundabout as miscellaneous work is completed over the next four weeks.

Drivers are encouraged to be alert for construction equipment and personnel through the work zone.

This $2.1 million project consists of a new roundabout at the intersection of SR 89 and Road 4 North near milepost 331. Additional work includes removal and replacement of existing pavement, drainage improvements, new pavement markings and lighting.

Paving on SR 89 at Road 4 North in Chino Valley next week

CHINO VALLEY — Crews will be paving at the new roundabout on State Route 89 at Road 4 North on Monday (Aug. 10) and Tuesday (Aug. 11). Work hours are from 6 a.m. to 6 p.m.

Paving activity may require some intermittent delays during work hours and drivers are encouraged to be alert for construction equipment and personnel through the work zone.

This $2.1 million project consists of a new roundabout at the intersection of SR 89 and Road 4 North between mileposts 330.48 and 330.78. Additional work includes removal and replacement of existing pavement, drainage improvements, new pavement markings and lighting.

This project is expected to be complete by the fall.

Widening project complete on SR 89 between Prescott and Chino Valley

Motorists traveling between Prescott and Chino Valley on State Route 89 (mileposts 320-325) now have a four-lane divided highway along a five-mile segment between Road 4 South in Chino Valley and Deep Well Ranch Road in Prescott.

Crews completed the final paving earlier this week and fully opened the roadway yesterday, July 15.

For the next six weeks, drivers can expect intermittent lane restrictions between 6 a.m. and 5 p.m. Monday through Friday until August 31 as crews do miscellaneous work and clean up on the project.

Overnight paving work on SR 89 between Prescott and Chino Valley continues

Overnight paving work resumes tonight and Wednesday, July 8 and 9 on State Route 89 between Prescott and Chino Valley, weather permitting. Work will take place on the south end of the project at the new Deep Well Ranch Road roundabout.

Motorists traveling on SR 89 for the next two nights between 6 p.m. and 6 a.m. should allow extra travel time through the work zone. A detour will be in place redirecting traffic in both directions onto the new Deep Well Ranch Road to Ruger Road. Delays of up to 20 minutes at a time are expected. Flaggers and law enforcement will be present to guide motorists through the detour safely.

Beginning Saturday, July 11 through Tuesday, July 14 crews will place rubberized asphalt throughout the project between 4 a.m. and 7 p.m. each day. Access into the businesses along the northbound side of the project will be impacted for up to 20 minutes at a time and motorists will be stopped until the paving crew passes the driveway.

The work zone will be clearly marked by temporary barricades and signage. ADOT advises drivers to allow additional time to reach their destinations and to proceed through the work zone with caution, comply with the reduced speed limit, and be alert for construction equipment and personnel.

Overnight paving work on SR 89 between Prescott and Chino Valley this weekend

CHINO VALLEY — Overnight paving work has been scheduled on State Route 89 between Prescott and Chino Valley this weekend starting Friday night, June 26 through Sunday, June 28, weather permitting. Work will take place on the south end of the project at the new Deep Well Ranch Road roundabout.

Motorists traveling on SR 89 between 4 p.m. and 5 a.m. Saturday, June 27 and Sunday, June 28 (no impacts on Friday night) should allow extra travel time through the work zone. A detour will be in place redirecting traffic in both directions onto the new Deep Well Ranch Road to Ruger Road.

Delays of up to 15 minutes at a time are expected. Flaggers and law enforcement will be present to guide motorists through the detour safely.

Upon completion of the $17 million project, ADOT will expand the two-lane roadway to a four-lane divided highway along a five-mile segment of SR 89 (mileposts 320-325) between Road 4 South in Chino Valley and Deep Well Ranch Road in Prescott, just north of the SR 89/SR 89A junction. The project is scheduled to be complete by August.

Utility relocation work on State Route 89 at Perkinsville Road in Chino Valley

CHINO VALLEY —Relocation of utility lines on State Route 89 at Perkinsville Road in Chino Valley is scheduled to begin on Thursday, June 25 and continue through Thursday, July 2 at noon in observance of the Fourth of July holiday.

Work hours are Monday through Friday between the hours of 7:30 a.m. and 5 p.m. each day.

Utility work will require a single lane restriction northbound (milepost 328) at the SR 89 and Perkinsville Road intersection during work hours.

This work to relocate utility lines is in advance of a roadway improvement project estimated to begin in the fall.

The work zone will be clearly marked by temporary barricades and signage. ADOT advises drivers to allow additional time to reach their destinations and to proceed through the work zone with caution, comply with the reduced speed limit, and be alert for construction equipment and personnel.