Tag Archives: Cordes Junction

I-17 southbound reduced to one lane until Saturday north of Cordes Junction

Posted on by

Southbound Interstate 17 will be reduced to one lane until Saturday, December 24, at Orme Road, between State Route 169 and State Route 69, as crews make critically needed repairs at the bridge, according to the Arizona Department of Transportation.

ADOT normally doesn’t perform work requiring lane restrictions over holiday weekends, but engineers have determined that these repairs, involving concrete on the bridge approach, must be performed immediately.

I-17 is narrowed to one lane between mileposts 270 and 269 approaching Cordes Junction. Northbound travel isn’t affected.

Southbound I-17 motorists should plan for delays, proceed through the work zone carefully and watch for construction personnel and equipment. While the work is scheduled to be completed on Saturday, bad weather can delay completion of projects.

Utility work on I-17 north of Cordes Junction scheduled on Sunday

Posted on by

Interstate 17 will be closed in both directions up to 15 minutes just north of Cordes Junction (milepost 264) at 7 a.m. Sunday, April 27 for overhead utility work.

The closures will provide a safe work zone as crews run overhead utility lines across the interstate.

ADOT advises drivers to allow additional time to reach their destinations and to proceed through the work zone with caution, comply with the reduced speed limit, and be alert for construction equipment and personnel. Law enforcement personnel will be present to enforce the closures as they occur.

Pavement work scheduled on SR 69 west of Cordes Junction next week

Posted on by

Daytime lane closures during work hours, minimal delays expected

The Arizona Department of Transportation will be working to seal pavement cracks on northbound State Route 69 between mileposts 263 and 267, just west of the Cordes Junction traffic interchange next week.

Drivers can expect a northbound left lane restriction from 7 a.m. to 3:30 p.m. Monday, March 17 through Thursday, March 20.

ADOT advises drivers to proceed through the work zone with caution, slow down, and be alert for construction equipment and personnel. Minimal delays are expected.